外觀
Statistics › 無母數方法 › 卡方檢定
類別關聯:卡方檢定與 Fisher's Exact Test
卡方檢定直接處理次數 (counts),檢驗類別變數之間的關係。它不建模連續變數的平均與變異,但仍有結構上的假設:觀測獨立、期望次數足夠。
| 檢定 | 問題 | 資料 |
|---|---|---|
| 獨立性檢定 (test of independence) | 兩個類別變數有關聯嗎? | 交叉表 |
| 同質性檢定 (test of homogeneity) | 多個母體的類別分配相同嗎? | 交叉表(公式同上,差在研究設計) |
| 適合度檢定 (goodness of fit) | 觀察次數符合期望分配嗎? | 一個類別變數 + 期望比例 |
| Fisher's exact test | 小樣本 2×2 的關聯 | 2×2 表 |
| McNemar's test | 配對的二元結果(同一人前後測) | 配對 2×2 表 |
獨立性檢定
- 建交叉表,得觀察次數 O
- 假設獨立,計算期望次數:
,df = (列數 − 1)(欄數 − 1)
觀察與期望差越多 → χ² 越大 → 越有關聯的證據。
python
import numpy as np
import pandas as pd
from scipy import stats
ct = pd.crosstab(df["genotype"], df["phenotype"])
chi2, p, dof, expected = stats.chi2_contingency(ct) # 2×2 預設有 Yates 連續性校正
# 檢查期望次數
(expected < 5).sum(), expected.min()
# 效果量 Cramér's V
n = ct.values.sum()
cramers_v = np.sqrt(chi2 / (n * (min(ct.shape) - 1)))
# 哪幾格造成關聯?標準化殘差 |r| > 2 值得注意
std_resid = (ct - expected) / np.sqrt(expected)| Cramér's V | 關聯強度(依表格大小調整) |
|---|---|
| 0.1–0.3 | 弱 |
| 0.3–0.5 | 中 |
| > 0.5 | 強 |
假設與替代方案
| 假設 | 準則 |
|---|---|
| 觀測獨立 | 每個個體只出現在一格 |
| 期望次數 | ≥ 80% 的格子 E ≥ 5,且沒有任何格子 E < 1 |
| 情況 | 建議 |
|---|---|
| 2×2,期望次數都 ≥ 5 | 卡方 |
| 2×2,有格子期望次數 < 5 | Fisher's exact test |
| 較大表格,很多格子 < 5 | 合併類別,或用模擬 p 值(R:fisher.test(tab, simulate.p.value = TRUE)) |
| 配對資料 | McNemar |
| 分層的 2×2 表(例如各醫院分別一張) | Cochran-Mantel-Haenszel 檢定 |
python
from scipy.stats import fisher_exact
from statsmodels.stats.contingency_tables import mcnemar
fisher_exact([[8, 2], [1, 9]]) # (odds ratio, p)
# 富集分析(單尾):列 = 在 / 不在基因清單,欄 = 在 / 不在 pathway
fisher_exact([[k, n - k], [K - k, N - K - n + k]], alternative="greater")
mcnemar([[30, 5], [15, 50]], exact=True).pvalue # 配對二元資料Fisher's exact test 使用超幾何分配精確計算 p 值,不只是「小樣本版卡方」。單尾 Fisher 就是 GO / pathway 富集分析 的標準做法。
適合度檢定
python
observed = np.array([8, 10, 12, 9, 11, 10]) # 骰子 60 次
stats.chisquare(observed) # 預設期望為均等
observed = np.array([45, 30, 25])
stats.chisquare(observed, f_exp=np.array([0.5, 0.3, 0.2]) * observed.sum()) # 自訂期望比例df = 類別數 − 1(若期望比例中有參數由資料估計,每估一個再減 1)。
遺傳學應用:檢查 Hardy-Weinberg 平衡、孟德爾分離比(3:1、9:3:3:1)都是適合度檢定。
視覺化
python
import seaborn as sns
import matplotlib.pyplot as plt
fig, ax = plt.subplots(1, 2, figsize=(11, 4))
sns.heatmap(ct, annot=True, fmt="d", cmap="Blues", ax=ax[0]) # 觀察次數
sns.heatmap(std_resid, annot=True, fmt=".2f", cmap="RdBu_r", center=0, ax=ax[1]) # 標準化殘差
plt.show()
pd.crosstab(df["genotype"], df["phenotype"], normalize="index").plot(kind="bar") # 列比例長條圖